Securam EC-0601A-L22-C-II-CH Operating Instructions Manual Download Page 26

Page: 26 / 29

ProLogic L22

Operation Instructions

Step 3: The display will prompt you to enter the Recovery Code. Enter the existing Recovery
Code. The default recovery Code is 999999.

Step 4: The LCD screen will display an alpha-numeric number random key. Record this number

and call an authorized SECURAM Recovery Center or SECURAM Tech Support at 1-805-988-

8088. This code remains valid for a period of 20 minutes only.

Step 5: After receiving the One Time Use Recovery Code from the Recovery Center, press the

“back” button; and you will be prompted to enter your Recovery Code.

Step 6: Your system will now be restored and will display this message:

The Super Code will now be reset to 111111.

The Manager Code will now be reset to 123456.

Time Delay, if programmed previously, remains active.

13.3 Simple Mechanical Reset

SECURAM Safe Locks can operate in either Analog mode or Digital mode. When they are paired with the

SafeLogic Series (EntryPads with no LCD screen or fingerprint reader) the safe lock operates in analog

mode.

When paired with a ProLogic Series (EntryPads with an LCD screen) or ScanLogic (EntryPads with a

fingerprint reader and/or LCD screen), the safe lock operates in digital mode.

Summary of Contents for EC-0601A-L22-C-II-CH






























Search results

Summary of Contents for EC-0601A-L22-C-II-CH

Reviews:

Related manuals for EC-0601A-L22-C-II-CH

Brands by name

Popular brands

Securam EC-0601A-L22-C-II-CH, Operating Instructions Manual

Search results

Summary of Contents for EC-0601A-L22-C-II-CH

Reviews:

Related manuals for EC-0601A-L22-C-II-CH

Brands by name

Popular brands