ProLogic L22
Operation Instructions
1
ProLogic L22 Operation Instructions
Document No: EC-0601A-L22-130919
Version No: V1.01
1.0 System Installation
1.1 System Components
1.2 Pairing the EntryPad with the Lock(s)
1.3 Lock and EntryPad Installation
1.4 Installing Battery
1.5 Test Lock Operation
2.0 Lock Operation
2.1 Opening the Lock
2.2 Opening the Lock in Time Delay
2.3 Opening the Lock Under Duress
2.4 Opening the Lock in Dual Control
2.5
Opening the Lock with a Multi-Lock System
3.0 Set Date and Time
3.1 Set Clock Time
3.2 Show Clock Time
3.3 DayLight Savings Time
4.0 Code Management
4.1 Enrolling New users
4.2 Change Code
4.3 Delete One User
4.4 Delete All Users
4.5 Disable/Enable User
5.0 System Identification
5.1 System Info
6.0 Time Delay
6.1 Set/Cancel Time Delay
6.2 Set Duress Time Delay
6.3 Setting Time Delay Override Users
7.0 Audit Trail Functionality
7.1 Show Audit Trail
7.2 Uploading Audit Trail
8.0 Single or Dual Control
8.1 Enable Dual Mode
9.0 Door Management
9.1 Max. Door Open Time
9.2 Configuring a Multi-lock system
9.3 Set Number of Locks
9.4 Authorize Locks
9.5 Enable Sequence
10.0 Duress Management
10.1 Duress Setup and Wiring Configuration
10.2 Duress Code Shift
11.0 Device Management
11.1 Set Device ID
12.0 Data Management
12.1 Encryption Key Set
13.0 Recovering the System – Reset to Default
13.1 Recovery Code Set
13.2 Recover System
13.3 Simple Mechanical Reset
14.0 System Testing
14.1 Cycle Testing
14.2 Hardware Testing
15.0 Menus
15.1 The ProLogic L22 Menus
