ENFORCER Fingerprint Reader and Keypad
SECO-LARM U.S.A., Inc.
27
User Operation of the Fingerprint Reader/Keypad:
To Operate with a User Fingerprint:
•
Place the finger on the fingerprint reader for one second to activate the relay.
•
You should hear 1 beep (if sounds are enabled) and the status LED should turn green to
indicate that the fingerprint is accepted and the door is unlocked.
To operate using a user code:
•
Enter the user code followed by the
key to activate the relay.
•
You should hear 1 beep (if sounds are enabled) and the status LED should turn green to
indicate that the user code is accepted and the door is unlocked.
To operate in multiple user code/fingerprint mode:
•
Input the required number of user codes each followed by the
key and/or fingerprints. They
can be input in any order, but with no more than a 5-second interval each code/fingerprint.
•
If not complete within 5 seconds, the device will return to standby mode and the users will
need to repeat the process.
•
You should hear 1 beep (if sounds are enabled) and the status LED should turn green to
indicate that the fingerprints/codes have been accepted and the door is unlocked.
Concealing Your User Code When a Bystander Is Present:
For extra security when a bystander is within sight of the keypad, the user may "hide" their true
user code within random digits up to a total of 10 digits.
If a user code is less than 6 digits, use preceding zeros as placeholders to make it 6 digits, but with
random digits before and/or after the true user code followed by the key.
Examples:
(where "x" is any random digit)
•
User code is 1234, enter
•
User code is 987654, enter
•
User code is 2345, enter
