ENFORCER Fingerprint Reader and Keypad
18
SECO-LARM U.S.A., Inc.
Programming the Keypad Sounds/Notifications:
Programming the Access Mode / Security Level (Continued):
When programming the access mode / security level, use the following general formula from within
base programming mode
(see "Enter and Exit Base Programming Mode," pg. 9):
( )
– Program Access Mode function code (LED will change to steady orange)
– Access Mode
Access Mode:
•
– User code access only
•
– Fingerprint access only
•
– Either user code or fingerprint (factory default)
•
~
– Multiple user codes or fingerprints (the second number 2~9 sets the number
of codes/fingerprints required for access).
NOTES:
•
To return to base programming mode to program other functions, press the
key (the LED
will flash red) followed by the function code for that function (LED becomes steady orange).
•
Exit programming mode by pressing the
key after all programming is completed. One beep
will sound and the LED will return to steady red. After 25 seconds of inactivity, the keypad will
automatically exit programming mode and return to standby.
Examples:
1.
Set the access mode to fingerprint only:
2.
Set the access to require four user codes / fingerprints:
The keypad sounds/notifications can be set to silent (The LED indicator will still function normally).
This affects all sounds from the keypad, including keypad presses, door propped-open, door
forced-open, wrong-code alarm, and successful fingerprint/code entry notifications. When
programming the keypad sounds/notifications, use the following general formula from within base
programming mode
(see "Enter and Exit Base Programming Mode," pg. 9):
– Program Keypad Sounds/Notifications function code (LED will change to steady orange)
– Keypad Sounds/Notifications Enabled/Disabled
Keypad Sounds/Notifications Enabled/Disabled:
•
– Disable
•
– Enable (factory default)
