ENFORCER Fingerprint Reader and Keypad
16
SECO-LARM U.S.A., Inc.
Programming the Output Mode and Time:
Deleting All User (Fingerprints and Codes):
To delete all users (fingerprints and codes), use the following formula from within base programming
mode
(see "Enter and Exit Base Programming Mode," pg. 9):
– Delete Users function code (LED will change to steady orange, must be repeated before
each user code)
– Master programming code
NOTES:
•
To return to base programming mode to program other functions, press the
key (the LED
will flash red) followed by the function code for that function (LED becomes steady orange).
•
Exit programming mode by pressing the
key after all programming is completed. One beep
will sound and the LED will return to steady red. After 25 seconds of inactivity, the keypad will
automatically exit programming mode and return to standby.
Examples:
1.
Delete a user fingerprint for an available fingerprint:
(present the user fingerprint to be deleted)
2.
Delete a user fingerprint for an unavailable fingerprint assigned to User ID #1:
3.
Delete a user code for User ID #2501:
4.
Delete user code or fingerprint for Users # 855 and #1505:
wait for beep, then
5.
Delete all users where the master code is 456789:
The relay can be programmed to toggle the relay ON and OFF (toggle mode), or to trigger for a
programmed length of time up to 99 seconds before automatically turning OFF. The toggle or
timed output can be used for locking or unlocking a door or for a variety of functions that can be
controlled with the fingerprint reader/keypad.
When programming the output mode and time, use the following general formula from within base
programming mode
(see "Enter and Exit Base Programming Mode," pg. 9):
– Program Output Mode and Time function code (LED will change to steady orange)
– Output Mode and Output Time
Deleting User Fingerprints or User Codes (Continued):
