94
Telephone control (Phone)
While one of the callers is connected, the other caller will be kept on hold.
●
To end an active connection with a caller, press the function button
.
During an active conversation it is only possible to place
one
other caller on
hold at the same time.
Note
The “Call notification” function in the mobile phone must be activated.
Note
The behaviour of the “Alternate” function will depend on the hands-free
profile version The above functions require compatibility with the
HFP 1.5
hands-free profile.
Making a conference call
Fig. 95 Adding several
callers to a teleconfer-
ence.
A caller “on hold” can be included in the active conversation, to make a
conference call.
Adding several callers to a conference call
All the callers in the conference are able to hear and speak to the other call-
ers.
●
Press the function button
Extras
and the
Conference
function button in
the pop-up window to add both callers to the conference call.
The display will show “
Conference
”.
An additional incoming call may be accepted during a telephone confer-
ence. It is possible to alternate between the conference and the new call, or
the new caller can be invited to join the conference. Depending on the pro-
vider, the conference call may include up to six callers.
●
Press the function button
to end the conference call and the connec-
tion with
all
the callers.
Operation via voice control
Introduction
The voice control system is activated by the “Push to talk” or
“PTT” button.
Some telephone functions can be activated using voice control. Thanks to
the voice control you can use many telephone functions without having to
take your eyes off the road or your hands off the steering wheel.
The voice control system is activated with:
●
“Push to Talk” or “PTT” button on multifunction steering wheel controls
⇒
Fig. 80
or
⇒
Fig. 83
.
When the voice recognition system is activated, an increasing acoustic sig-
nal is heard. The recommendations in the next section
⇒
page 95, Correct
