69
Navigation
Directly excluding a route section further ahead
(congestion)
During a route guidance, the route section of the remaining stretch of route
can be excluded manually.
●
Press the unit button
in any of the navigation menus (except SETUP).
●
In the information window, press the
Route
function button.
●
Press the
Congestion ahead
function button in the pop-up window.
●
Enter the length of the section to be excluded by turning the setting
knob
⇒
Fig. 1
10
.
The length indicated for the route section is shown on the lower line of the
screen. If
(Max)
is displayed, this indicates that the maximum permitted
length for exclusion has been reached.
●
Press the
OK
setting knob or function button to confirm the exclusion.
The excluded route section is displayed on the map.
Route guidance will start again when the navigation system has calculated
an alternative route to the excluded section.
Re-opening a section
●
Press the unit button
in any of the navigation menus (except SETUP).
●
In the information window, press the
Route
function button.
●
Press the
Lift cong. excl.
function button in the pop-up window.
Note
It is also possible to enter or cancel an exclusion while viewing the TMC traf-
fic announcements using the function button
Congestion ahead
⇒
page 70.
Note
Information on manually excluding route sections further ahead
⇒
page 68.
Dynamic route guidance with TMC (Traffic Message
Channel)
Fig. 72 Route options
settings menu
The prerequisite for dynamic route guidance is always the reception of a
TMC traffic news station for the navigation area available in the unit. TMC
traffic reports received can be displayed in a list
⇒
page 70.
If dynamic route guidance is activated, any TMC traffic reports are taken into
account in the route calculation.
Switching the dynamic navigation on or off
●
Press the
SETUP
unit button in one of the navigation menus.
●
In the
Navigation
setup menu, press the
Route options
function button to
open the
Route options
setup menu
⇒
Fig. 72
.
●
Alternatively:
press the
TRAFFIC
and
SETUP
buttons successively to open
the setup menu TRAFFIC.
●
To switch the dynamic navigation on or off, check or uncheck the
Dynamic route
option
⇒
Fig. 72
.
