SeaLevel SeaI/O User Manual Download Page 59 | Manualshive

Page: 59 / 112

background image

59

© Sealevel Systems, Inc.

SeaI/O | SL9049 11/2021

Configuration

The Configuration page includes the options to change the device name and HTTP authentication settings,
as well as enable or disable firmware update-related features.

The device name is reflected in the NetBIOS and mDNS name mentioned in the first-time setup process.
Changing this setting requires a device restart.

Change the HTTP Authentication settings to change the username and password required to access the
internal web pages.

The Firmware Update settings allow for the local device (the wireless adapter) and Modbus-connected
SeaI/O slave device firmware update features to be enabled/disabled. Both features are disabled by default

for security. To allow updating of the local device (the wireless adapter itself), check the “Enable firmware
update of device” checkbox and click Apply. Note that the Firmware Update panel on the Device page will

be sh

own or hidden to reflect the value of the “Enable firmware update of device” setting. The “

Enable

firmware upd

ate of slave devices via MaxSSD” setting allows the wireless adapter to pass along firmware

updates to any SeaI/O slave device connected via RS485 to the base/master SeaI/O device when using
MaxSSD. Any change to the Firmware Update settings take effect immediately after clicking the Apply
button; no restart is required.

Figure 6 - Configuration page

Network

The Network page allows configuration of DHCP client settings in Infrastructure mode, DHCP server settings in
Access Point mode, and Access Point configuration, including wireless security.

«
...
57
58
59
60
61
...
»

Summary of Contents for SeaI/O

















































































































Reviews:

No comments

Related manuals for SeaI/O

Brand: VAT Pages: 29

Brand: Balboa Instruments Pages: 19

Brand: OmarLift Pages: 14

Brand: BEIER-Electronic Pages: 22

Brand: Samsung Pages: 32

ACTIVE DRIVER M/M 1.1

Brand: DAB Pages: 10

Brand: d&b audiotechnik Pages: 3

ACTIVE DRIVER M/M 1.1

Brand: DAB PUMPS Pages: 38

Brand: Racal Instruments Pages: 94

Brand: Racal Instruments Pages: 97

Brand: Parkside Pages: 86

Brand: Sanhua Pages: 3

Brand: QED Pages: 26

disklavier DKC-850

Brand: Yamaha Pages: 2

Brand: National Instruments Pages: 72

Brand: National Instruments Pages: 41

MAGNUM ALERT 3000 FIRE ALARM

Brand: NAPCO Pages: 2

Brand: National Instruments Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands