SeaLevel SeaI/O User Manual Download Page 3

Page: 3 / 112

SeaI/O | SL9049 11/2021

Before You Get Started

Advisory Conventions

Warning

The highest level of importance used to stress a condition where damage could result to the product,
or the user could suffer serious injury.

Important

The middle level of importance used to highlight information that might not seem obvious or a
situation that could cause the product to fail.

Note

The lowest level of importance used to provide background information, additional tips, or other non-
critical facts that will not affect the use of the product.

Do not connect the I/O module to the host until SeaMAX software is installed.

Useful Accessories

All items can be purchased from our website (

www.sealevel.com

) or by calling our sales team at +1

(864) 843-4343.

E Series (Ethernet)

CAT5 Patch Cable (Part# CA246)

Standard 7' CAT5 UTP Patch Cable (RJ45).

CAT5 Crossover Cable (Part# CA251)

Standard 7' CAT5 UTP Crossover Cable (RJ45).

Summary of Contents for SeaI/O

















































































































Search results

Summary of Contents for SeaI/O

Reviews:

Related manuals for SeaI/O

Brands by name

Popular brands

SeaLevel SeaI/O, User Manual

Search results

Summary of Contents for SeaI/O

Reviews:

Related manuals for SeaI/O

Brands by name

Popular brands