SeaLevel SeaI/O User Manual Download Page 65 | Manualshive

Page: 65 / 112

background image

65

© Sealevel Systems, Inc.

SeaI/O | SL9049 11/2021

Configuring an Ethernet (E-Series) Module

This section applies only to Ethernet (E-series) SeaI/O modules. For all other SeaI/O modules, refer to

the Configuring a “Base” SeaI/O Module and Configuring Expansion Modules sections on the previous

pages.

Verify that SeaMAX software has been installed successfully and that an Ethernet SeaI/O module is connected
directly to your computer using the yellow crossover cable supplied with your module. This module will become

the “base” module.

All Ethernet SeaI/O modules are shipped with DHCP enabled. When you first connect an Ethernet SeaI/O module
to the network, the status LEDs on the front of the module will blink while it searches for a DHCP server. Once
it receives an IP address, the status LEDs will remain on.

If no DHCP server is available, the Ethernet SeaI/O module will default to a random IP address in the range

169.254.x.x. To discover the SeaI/O module’s IP address, start the Ethernet Config utility (Start

→

All Programs

→

Sealevel SeaMAX

→

Ethernet Config) installed with SeaMAX.

Click on

the “Search for SeaI/O Devices” button and the ‘Available SeaI/O Devices’ pane should refresh with any

Ethernet or Wireless SeaI/O modules that are found on the network. Select one of the modules in the list by
clicking on it. You can update the settings in the Device Network Settings pane and then confirm these changes

by clicking the “Apply Changes” button. The module list should refresh, indicating that your changes were

successful.

«
...
63
64
65
66
67
...
»

Summary of Contents for SeaI/O

















































































































Reviews:

No comments

Related manuals for SeaI/O

Brand: Warner Electric Pages: 3

Brand: iCeeO2 Pages: 7

Brand: SABAF Pages: 6

Brand: GBD Pages: 12

Brand: Hansen Pages: 4

Brand: Bard Pages: 8

Brand: Bardiani Valvole Pages: 35

Brand: Garmin Pages: 220

Brand: Gardena Pages: 16

Brand: National Instruments Pages: 102

Brand: NAU ROBOTICS Pages: 109

Maschine Mikro MK2

Brand: Native Instruments Pages: 181

Brand: Rain Bird Pages: 4

Brand: Rain Bird Pages: 2

Brand: Rain Bird Pages: 140

WeatherSmart RSC600i

Brand: Raindrip Pages: 36

Brand: Watlow Pages: 59

Tekmar WiFi Snow Melting Control 670

Brand: Watts Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands