7
JDL V1.0 8 2022
INSTALLATION
Once the machines have been unpacked and placed in their permanent location, the electrical connection and
mechanical connection must be made. Tools required: Adjustable wrench and Philips screwdriver. For optimal
installation, follow the order of connections as outlined below:
1.Mechanical Connection between Snack and Beverage Units:
The Snack and Beverage units must be screwed together for safety purposes. Two screws are
provided in the white envelope found in the vend area of the Snack unit. Square the fronts and sides
of the Snack and Beverage units. Open the Snack unit door and locate the two holes at the bottom of
the unit. Insert both screws and tighten.
2.Electrical Connection between Snack and Beverage Units and Beverage Display Lighting Connection:
Cut an opening in the Styrofoam in the upper right (front) corner and save the foam for reinsertion.
Open the Beverage unit door and locate the beverage main harness and refrigeration harnesses. Insert
harnesses through the opening up into the Snack cabinet (Figure 1).
Figure 1 – Installing Refrigeration Harnesses
Beverage and
Refrigeration
Harnesses
Insert Beverage
and Refrigeration
Harnesses
through here