5
JDL V1.0 8 2022
OVERVIEW
This manual covers Installation, Setup, Programming and Service instructions. It is extremely important that
this manual be read thoroughly prior to commissioning the vending machine in the field. This will ensure a
satisfactory long-term performance.
The vending machine consists of two (2) separate cabinets that are installed together via mechanical means
and connected via electrical connections to operate as ONE unit.
The Snack Vendor (JDLS) consists of three (3) trays. The first and second trays have 4 selections each (Tray 1
– 111, 113, 115, 117, Tray 2 – 121, 123, 125, 127). The third tray has 8 selections (130 through 137). The top
two trays are normally used for products that are wider such as chips, pastries etc. and the third tray is used
for Confectionary items such as candy bars. The Snack Vendor (JDLS) also houses all the payment mechanisms
and electronic Vending Machine Controller (VMC) on the right side of the cabinet. The payment mechanisms,
electronic components (such as VMC) and transformer are installed on a vertical shelf that slides out for easy
access. The connectors to connect the Beverage Unit (JDLD) are also provided in this vertical shelf of the Snack
Vendor (JDLS).
The Beverage Vendor (JDLD) is designed with a vertical drop system. The Beverage Vendor also houses
the removable Refrigeration System. The cabinet of the Beverage Vendor has a delivery system that has 7
selections for Cans or Bottles (140 through 146). The loading instructions are given in subsequent sections.
CAUTION!
If the power cord is damaged, it must be replaced by the manufacturer, authorized service
agent or a similarly qualified person to avoid electrical hazards.
ATTENTION!
This dispensing machine is very heavy. Ensure that sufficient personnel are available for
lifting or transporting the machine. Use proper lifting procedures and equipment.
CAUTION!
Certain components of this machine are sensitive to static electricity. Precautions for
handling sensitive devices should be observed when handling these items.
ATTENTION!
Leave at least 2” (5cm) between the back of the dispensing machine and the wall to allow for
air flow.
CAUTION!
R290 refrigerant is used in this machine. R290 is a purified form of propane and can cause a
fire or minor explosion if precautions are not observed.
