9
JDL V1.0 8 2022
The Beverage Unit has a live product display that is lit by LED lighting. Locate the LED Light harness,
Figure 5
,
on the inside of the Beverage Unit Door. Insert the LED Light harness up through the Snack Unit as done for the
other connections. Connect the LED Light harness to the corresponding connector.
Reinsert the Styrofoam piece for maximum insulation of the refrigeration unit.
Figure 5-
Beverage
Display LED Light
Harness; insert
through
Connect the snack unit to the beverage unit with the jumper power cord. Position cord cover over the jumper
cord and attach with four(4) screws into holes provided while ensuring the cord is not pinched or trapped
between the cover and the cabinet. The cord cover is not necessary for the operation of the machine, but it
does protect the cord and make the machine more aesthetically pleasing.
Then connect the beverage unit power cord to wall socket with power. Using a power strip is recommended.
CAUTION: to avoid risk of electrical shock, the power to the wall socket should be made last of all connections.
Figure 6 –
Main Power Connection
Jumper Cord – FIRST connect
Snack to Beverage
Power Cord – connect
Beverage to wall socket LAST