manualshive.com logo in svg

Sea-doo GTI SE Series, Operator'S Manual

The Sea-doo GTI SE Series Operator's Manual is a comprehensive manual that provides detailed instructions and information on operating and maintaining your Sea-doo watercraft. This manual is available for free download at manualshive.com, ensuring easy access to essential information to enhance your riding experience.

Share
Download
background image

TABLE OF CONTENTS

MAINTENANCE PROCEDURES

(cont’d)

Throttle Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Throttle Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Ride Plate and Water Intake Grate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Ski/Wakeboard Post (Wake). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

WATERCRAFT CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Post-Operation Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Watercraft Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

STORAGE AND PRESEASON PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Preseason Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

TECHNICAL INFORMATION

IDENTIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Hull Identification Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Engine Identification Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
EPA Compliance Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

ENGINE EMISSIONS INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Manufacturer's Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Dealer's Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Owner Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
EPA Emission Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

TROUBLESHOOTING

TROUBLESHOOTING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

100

MONITORING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

103

Pilot Lamps and Message Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

103

Beeper Code Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

105

WARRANTY

BRP LIMITED WARRANTY – USA AND CANADA: 2010 SEA-DOO

®

PERSONAL

WATERCRAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

108

CALIFORNIA

AND

NEW

YORK

EMISSION

CONTROL

WARRANTY

STATEMENT FOR MODEL YEAR 2010 SEA-DOO

®

PERSONAL WATERCRAFT

WITH 4-TEC

®

ENGINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

BRP INTERNATIONAL LIMITED WARRANTY: 2010 SEA-DOO

®

PERSONAL

WATERCRAFT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

116

_______________

5

Summary of Contents for GTI SE Series













































































































































Reviews:

No comments

Related manuals for GTI SE Series

Sevylor HUDSON KCC360 Owner'S Manual preview
HUDSON KCC360
Brand: Sevylor Pages: 64
Walker Bay 275 RID Assembly Instructions Manual preview
275 RID
Brand: Walker Bay Pages: 8
PROAQUA 34-8922 Instruction Manual preview
34-8922
Brand: PROAQUA Pages: 24
Williams Turbojet 285 Owner'S Handbook Manual preview
Turbojet 285
Brand: Williams Pages: 51
Ranger boats 522VX Owner'S Manual preview
522VX
Brand: Ranger boats Pages: 78
BluEye X3 User Manual preview
X3
Brand: BluEye Pages: 48
Sea-doo 210 Challenger Series Operator'S Manual preview
210 Challenger Series
Brand: Sea-doo Pages: 156
Sea-doo 210 Challenger Operator'S Manual preview
210 Challenger
Brand: Sea-doo Pages: 168
Sea-doo 230 Series Operator'S Manual preview
230 Series
Brand: Sea-doo Pages: 180
Sea-doo 2001 GTS Operator'S Manual preview
2001 GTS
Brand: Sea-doo Pages: 180
Sea-doo 2012 GTX 155 Operator'S Manual preview
2012 GTX 155
Brand: Sea-doo Pages: 192
Crivit Rubber Dinghy Instructions For Use Manual preview
Rubber Dinghy
Brand: Crivit Pages: 42
Malibu Boats 21 VLX Owner'S Manual preview
21 VLX
Brand: Malibu Boats Pages: 309
Hunter 430 Owner'S Manual preview
430
Brand: Hunter Pages: 84
Nacra F20 Carbon Assembly & Rigging Manual preview
F20 Carbon
Brand: Nacra Pages: 69
World Cat 295CC 2015 Owner'S Manual preview
295CC 2015
Brand: World Cat Pages: 99
Polaris INT'L SLX W004699 Parts Manual preview
INT'L SLX W004699
Brand: Polaris Pages: 52
SeaDoo 105A Manual preview
105A
Brand: SeaDoo Pages: 391

Brands by name

Popular brands

Load more brands