Sea-doo GTI SE Series, Operator'S Manual

Page: 94 / 140

ENGINE EMISSIONS INFORMATION
NOTE: Maintenance, replacement, or
repair of the emission control devices
and systems may be performed by any
marine SI (spark ignition) engine repair
establishments or individual.
Manufacturer's
Responsibility
Beginning with 1999 model year en-
gines, PWC manufacturers of marine
engines must determine the exhaust
emission levels for each engine horse-
power family and certify these engines
with the United States of America En-
vironmental Protection Agency (EPA).
An emissions control information label,
showing emission levels and engine
specifications, must be placed on each
vehicle at the time of manufacture.
Dealer's Responsibility
When performing service on all 1999
and more recent Sea-Doo watercraft
that carry an emissions control infor-
mation label, adjustments must be
kept within published factory specifi-
cations.
Replacement or repair of any emission
related component must be executed
in a manner that maintains emission
levels within the prescribed certifica-
tion standards.
Dealers are not to modify the engine in
any manner that would alter the horse-
power or allow emission levels to ex-
ceed their predetermined factory spec-
ifications.
Exceptions include manufacturer's
prescribed changes, such as altitude
adjustments for example.
Owner Responsibility
The owner/operator is required to have
engine maintenance performed to
maintain emission levels within pre-
scribed certification standards.
The owner/operator is not to, and
should not allow anyone to modify the
engine in any manner that would alter
the horsepower or allow emissions
levels to exceed their predetermined
factory specifications.
EPA Emission Regulations
All 1999 and more recent Sea-Doo
watercraft manufactured by BRP are
certified to the EPA as conforming to
the requirements of the regulations for
the control of air pollution from new
watercraft engines. This certification
is contingent on certain adjustments
being set to factory standards. For
this reason, the factory procedure for
servicing the product must be strictly
followed and, whenever practicable,
returned to the original intent of the
design.
The responsibilities listed above are
general and in no way a complete list-
ing of the rules and regulations per-
taining to the EPA requirements on ex-
haust emissions for marine products.
For more detailed information on this
subject, you may contact the following
locations:
MAIL:
U.S. Environmental Protection Agency
Office of Transportation and Air Quality
1200 Pennsylvania Ave. NW
Mail Code 6403J
Washington D.C. 20460
EPA INTERNET WEB SITE:
http://www.epa.gov/otaq
EPA E-MAIL:
otaqpublicweb@epa.gov
92
______________