Sea-doo GTI SE Series, Operator'S Manual

Page: 25 / 140

TRAILERING INFORMATION
NOTICE
To avoid damaging
O.P.A.S. side vanes, the maximum
trailer wood bunks span includ-
ing bunk width should not exceed
71 cm (28 in). Ends of both trailer
wood bunks should not be more
than 2.59 m (102 in) away from wa-
tercraft bow attachment point. See
following illustration.
F00L2VY
A
B
1
2
TRAILER FOR O.P.A.S.
1. Watercraft front (bow) attachment point
2. Wood bunks
A. 71 cm (28 in)
B. 2.59 m (102 in)
Make sure that fuel tank cap is properly
installed.
WARNING
Never tip this watercraft on end for
transporting. We recommend that
you carry the watercraft in its nor-
mal operating position.
Check the applicable laws and regula-
tions in your area concerning towing a
trailer, especially the following rules:
– Brake system
– Tow vehicle weight
– Mirrors.
Take the following precautions when
towing the watercraft:
– Respect tow vehicle maximum
weight capacity and the tongue
weight capacity as recommended
by manufacturer.
– Tie the watercraft to both front and
rear (bow/stern) eyelets so that it is
firmly retained on the trailer. Use ad-
ditional tie-downs if necessary.
– Ensure all storage compartment
covers and seat(s) are properly
latched.
– Observe trailering safety precau-
tions.
NOTICE
Do not route ropes or
tie-downs over the seat or grab
handle as they could produce per-
manent damage. Wrap ropes or
tie-downs with rags or similar pro-
tectors where they can touch the
watercraft body.
WARNING
Make sure seat(s) is/are securely
latched before prior to trailering.
A Sea-Doo cover can protect the water-
craft, particularly before driving on dirt
roads, to prevent dirt entry through the
air intake openings.
WARNING
When trailering the watercraft,
NEVER leave any equipment on
the watercraft.
________
SAFETY INFORMATION
________
23