Sea-doo GTI SE Series, Operator'S Manual

Page: 42 / 140

CONTROLS/INSTRUMENTS/EQUIPMENTS
Finger Throttle
RXP-X Model
Provides more comfortable throttle op-
eration under demanding conditions.
When pulled, the watercraft acceler-
ates. When fully released, engine au-
tomatically slows down to idle speed
and watercraft is gradually stopped by
water drag.
smo2010-001-006_a
1. Throttle lever
2. To accelerate
3. To decelerate
4) Engine Start/Stop
Button
To start engine, depress and hold the
start/stop button. Release immedi-
ately after engine is started.
To stop engine, depress the start/stop
button. When stopped, disconnect
the D.E.S.S. key from its post. It is sug-
gested to release throttle lever first.
WARNING
Directional control is reduced
when the throttle is released and
lost when engine is off.
smo2008-001-010_a
TYPICAL — ALL MODELS EXCEPT RXP-X
1. Engine start/stop button
smo2008-001-011_a
RXP-X MODEL
1. Engine start/stop button
5) Variable Trim System
(VTS)
RXP-X Model
Provides watercraft trim adjust-
ments, maximizes acceleration and
high-speed stability.
Push buttons to adjust riding attitude
of the watercraft. Refer to
OPERAT-
ING INSTRUCTIONS
section for the
description of the Variable Trim Sys-
tem (VTS).
40
______________