Sea-doo GTI SE Series, Operator'S Manual

Page: 53 / 140

CONTROLS/INSTRUMENTS/EQUIPMENTS
smo2009-001-002
TYPICAL - SKI/WAKEBOARD POST
EXTENDED
To retract the post, push straight down
on the top of the post.
If the post becomes difficult to extend
or retract, simultaneously push in on
both sides of the locking clip toward
front of watercraft to release the post.
smo2009-001-003_a
TYPICAL - PUSH TOWARD FRONT
1. Locking clip
WARNING
Make sure ski/wakeboard post is
fully extended and locked before
use. Completely retract and lock
when not used. Use caution with
skier/wakeboarder in tow as tow
rope may backlash to watercraft
when released. Never perform a
sharp turn when towing a skier,
wakeboarder or any toy.
NOTICE
The ski/wakeboard post is
designed for towing a skier or wake-
boarder with a maximum gross
weight of 114 kg (250 lb).
Always have one person other than the
operator as an observer.
NOTE: The handles on the ski/wake-
board post are provided as handholds
for the observer.
NOTICE
Never use the ski/
wakeboard post to tow other crafts.
Respect the maximum load limit rat-
ing of the ski/wakeboard post. Over-
loading can affect maneuverability,
stability and performance.
17) Wakeboard Rack
Wake Model
A convenient removable rack used to
carry a wakeboard on the watercraft
when on the water.
NOTE: A wakeboard rack can be in-
stalled on both sides of watercraft.
To install:
1. Position rack on bumper trim with
its centerline in between the buckle
receivers located in the footwell
area.
2. Position the 2 outer J-hooks of the
rack so as to grab the fiberglass lip
of the hull underneath the bumper
trim.
F18L3DY
2°
1°
TYPICAL
3. Attach the male buckles onto the
buckle receivers located in the
footwell.
_______________
51