Sea-doo GTI SE Series Operator'S Manual Download | Manualshive

Page: 116 / 140

background image

Parts covered for a Model Year 2010 Sea-Doo

®

personal watercraft equipped

with 4-TEC

®

engines:

Idle bypass valve

Air intake adapter

Throttle position sensor

Spark plugs

Intake manifold air pressure sensor

Ignition coils

Intake manifold air temperature sensor

Air box

Engine temperature sensor

Intake and exhaust valve and seals

Knock sensor

Intake manifold

Engine control module ECM

Crankcase ventilation valve

Throttle body

Throttle body seal

Fuel rail

Intake manifold seal

Fuel injectors

Wire harness and connectors

Fuel pressure regulator

Fuel filter

Fuel pump

The emission warranty covers damage to other engine components that is caused
by the failure of a warranted part.

The BRP Operator’s Guide provided contains written instructions for the proper
maintenance and use of your personal watercraft. All emission warranty parts are
warranted by BRP for the entire warranty period of the personal watercraft, unless
the part is scheduled for replacement as required maintenance in the Operator’s
Guide.

Emission warranty parts that are scheduled for replacement, as required mainte-
nance, are warranted by BRP for the period of time before the first scheduled re-
placement date for that part. Emission warranty parts that are scheduled for reg-
ular inspection, but not regular replacement, are warranted by BRP for the entire
warranty period of the personal watercraft. Any emission warranty part repaired or
replaced under the terms of this warranty statement is warranted by BRP for the
remainder of the warranty period of the original part. All parts replaced under this
limited warranty become the property of BRP.

Maintenance receipts and records should be transferred to each subsequent
owner of the personal watercraft.

114

______________

«
...
114
115
116
117
118
...
»

Summary of Contents for GTI SE Series













































































































































Reviews:

No comments

Related manuals for GTI SE Series

Brand: Parker Pages: 68

Southern Pacific Shearwater 260 AL

Brand: Kiwi Yachting Pages: 20

SWIFT TRAWLER 42

Brand: BENETEAU Pages: 132

Brand: Quicksilver Pages: 49

Brand: Arey's Pond Pages: 10

Brand: Sea Ray Pages: 22

Brand: Sea Ray Pages: 22

Brand: Sea Ray Pages: 23

Brand: Sea Ray Pages: 20

1989 Express Cruiser 390

Brand: Sea Ray Pages: 27

Brand: Sea Ray Pages: 40

Brand: Sea Jay Pages: 24

2001 290 Bow Rider

Brand: Sea Ray Pages: 60

Brand: Smartwave Pages: 12

Brand: Clas Ohlson Pages: 44

Brand: CS Yachts Pages: 45

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands