Sea-doo GTI SE Series, Operator'S Manual

Page: 52 / 140

CONTROLS/INSTRUMENTS/EQUIPMENTS
F18L0IY
1
TYPICAL
1. Boarding step
Pull down the step with your hand and
hold until a foot or a knee is put on the
step.
F18L0JY
WARNING
Engine must be shut off before at-
tempting to board the watercraft
using the boarding step.
15) Bilge Drain Plugs
Unscrew drain plugs whenever wa-
tercraft is on the trailer. This will allow
water accumulated in the bilge to be
evacuated and helps to reduce con-
densation.
NOTICE
Remove watercraft from
water prior to unscrewing drain
plugs.
F18L14Y
1 1
2 3
TYPICAL
1. Drain plugs
2. Tighten
3. Unscrew
NOTICE
Ensure drain plugs are
properly secured prior to launching
the watercraft in water.
16) Ski/Wakeboard Post
Wake Model
Pull up on the knob to extend the post.
Ensure it is properly locked. Ensure
post is fully extended and properly
locked before attaching ski or wake-
board rope.
smo2009-001-001_a
TYPICAL - SKI/WAKEBOARD POST
RETRACTED
1. Pull on this knob to extend
50
______________