Sea-doo GTI SE Series, Operator'S Manual

Page: 68 / 140

SPECIAL PROCEDURES
When towing your watercraft in water,
pinch the water supply hose from the
exhaust manifold to the muffler with a
large hose pincher (P/N 529 032 500).
F01B23Y
This will prevent the exhaust system
from filling which may lead to water be-
ing injected into and filling the engine.
Without the engine running, there isn't
any exhaust pressure to carry the wa-
ter out the exhaust outlet.
NOTICE
Failure to follow these
instructions may result in damage
to the engine. If you must tow a
stranded watercraft in water and do
not have a hose pincher, be sure to
stay well below the maximum tow-
ing speed of 24 km/h (15 MPH).
NOTE: A red tape on the water supply
hose indicates which hose to pinch.
smo2008-001-072_a
TYPICAL
1. Supply hose with red tape
NOTICE
When finished towing the
watercraft, hose pincher must be re-
moved before operating it. Failure
to do so will result in damage to the
engine.
66
______________