Sea-doo 1997 GS Operator'S Manual Download

Page: 84 / 105

Pre-Season Preparation Chart

NOTE:

It is highly recommended that the dealer perform the annual safety

inspection and factory campaigns in addition to the pre-season preparation

all at the same time.

➀

Before installing new spark plugs, it

is suggested to burn the excess
BOMBARDIER LUBE lubricant by
starting the engine using the old
spark plugs.

➁

Safety item covered in the annual

safety inspection.

OPERATIONS

To be performed by

Lubrication/corrosion protection

OPERATOR

Battery condition/charging and reinstallation

DEALER

Battery, starter connections and routing

➁

DEALER

Spark plug replacement

➀

OPERATOR

Impeller shaft reservoir oil inspection

DEALER

Propulsion system inspection

DEALER

Oil filter replacement

DEALER

Fuel reservoir straps

OPERATOR

Oil reservoir straps

OPERATOR

Oil injection reservoir filling

OPERATOR

Flame arrester cleaning/inspection

➁

DEALER

Fuel filter replacement

DEALER

Fuel line condition

➁

DEALER

Filler neck, fuel tank and fuel cap condition

➁

DEALER

Check valves, fasteners, fuel system pressurization

➁

DEALER

Throttle

➁

and choke cable inspection/adjustment

DEALER

Oil injection pump adjustment and bleeding

DEALER

Engine ignition timing

DEALER

Carburetor adjustment

DEALER

Steering system adjustment/inspection

➁

DEALER

Reverse cable adjustment (GTS/GTI/GTX)

DEALER

Inspection of water tank trap drains (bilge lines and bailer pick-ups)

DEALER

Inspection of cooling system hoses

DEALER

Monitoring beeper

DEALER

Digitally encoded security system (if equipped)

DEALER

CAUTION

Coupler hose must be installed or
watercraft must be in water to
cool engine. Running the engine
without cooling water will dam-
age exhaust hose interior and
may damage engine.

smo9701a.bk : smo9701b.fm5 Page 82 Monday, November 3, 1997 9:54 AM

www.SeaDooManuals.net

Summary of Contents for 1997 GS









































































































Search results

Summary of Contents for 1997 GS

Reviews:

Related manuals for 1997 GS

Brands by name

Popular brands

Sea-doo 1997 GS, Operator'S Manual

Search results

Summary of Contents for 1997 GS

Reviews:

Related manuals for 1997 GS

Brands by name

Popular brands