Sea-doo 1997 GS Page 53 Operator'S Manual Download | Manualshive

Page: 53 / 105

background image

51

Inspect leading edges of the impeller,
if they have nicks or bends perfor-
mance will be greatly reduced.

Bilge

Should water be present in the bilge,
tilt the watercraft to the rear and un-
screw drain plug to completely empty
the bilge.

Secure bilge drain plug.

Battery

Fuel and Oil Reservoirs

With the watercraft horizontal, fill the
fuel tank to specified level with fuel.

Check the oil level and refill reservoir
as necessary.

Check fuel/oil reservoir retaining
straps.

Engine Compartment

Fire Extinguisher

Make sure it is full, in good condition
and well secured.

Steering and Throttle
Systems

Assisted by another person, check
steering operation for free movement.
When the handlebar is horizontal, the
jet pump nozzle should be in the
straight ahead position. Ensure the jet
pump nozzle pivots easily while han-
dlebar is turned.

Check throttle lever and cable several
times for free and smooth operation.
It must return to its initial position im-
mediately after it is released.

Reverse System
(GTS/GTI/GTX Models)

Check reverse gate operation for free
movement. With the selector lever
pushed in and locked, the gate should
be in upward position. Ensure the re-
verse gate moves easily while selec-
tor lever is pulled out.

Variable Trim System
(SPX/GSI/GSX/XP Models)

Push on arrows on VTS button to
check nozzle movement.

NOTE:

With the safety lanyard

disconnected, trim can be activat-

ed for approximately 30 seconds by
depressing the engine start/stop button.

Safety Lanyard and Engine
Start/Stop Button

Ensure that both switches operate
properly. Start engine and stop it using
each switch individually.

◆

WARNING

Make sure to take the watercraft
out of water prior to unscrewing
the drain plug.

◆

WARNING

Verify tightness of battery cables
and retaining straps.

◆

WARNING

Should any leak or gasoline odor
be present, do not start the en-
gine or operate the watercraft.
Refer to an authorized dealer im-
mediately.

◆

WARNING

Verify the reverse gate locking
operation before starting the en-
gine.

'

smo9701a.bk : smo9701b.fm5 Page 51 Monday, November 3, 1997 9:54 AM

www.SeaDooManuals.net

«
...
51
52
53
54
55
...
»

Summary of Contents for 1997 GS










































































































Reviews:

No comments

Related manuals for 1997 GS

Brand: Advanced Elements Pages: 20

Brand: SEATTLE Sailing Club Pages: 9

Brand: RedShark Bikes Pages: 36

Brand: J/Boats Pages: 77

Brand: SeaDoo Pages: 391

Brand: Gumotex Pages: 52

Brand: Lagoon Pages: 30

Grand Soleil 50

Brand: Cantiere Del Pardo Pages: 124

Brand: Zodiac Pages: 44

Brand: Yamaha Pages: 144

Brand: Ventus Pages: 54

Brand: Sea Eagle Boats Pages: 16

PaddleSki 395ps

Brand: Sea Eagle Pages: 9

Brand: Sea Eagle Pages: 13

Brand: Sea Eagle Pages: 14

Stealth Stalker STS10

Brand: Sea Eagle Pages: 18

Brand: Sea Eagle Pages: 15

Brand: Sea Eagle Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands