manualshive.com logo in svg

Sea-doo 1997 GS, Operator'S Manual

Share
Download
Sea-doo 1997 GS Operator'S Manual Download Page 24

22

TYPICAL

TYPICAL

F07L01L

9

Meeting head on: KEEP RIGHT

Passing: Give right of way to
other boat and KEEP CLEAR.

Crossing: GIVE
RIGHT OF WAY to
boats ahead and to
your right (see Yield
Zone). Never cross
in front of a boat.

starboard

port

bow

stern

REMEMBER THESE RULES OF THE ROAD

WARNING

YIELD
ZONE

• Check throttle & steering operation before starting engine.
• Directional control is lost when throttle is released or engine shut off.
• Do not splash others or jump waves or wakes with this watercraft.
• Operator and passengers should always wear approved life vests and recommended clothing.
• Gasoline is explosive. Always observe proper fueling practices and maintenance.
• Properly attach safety lanyard to your life vest.
• This watercraft is not designed for night-time operation.
• Seating is limited to one operator and two passengers (495 lbs.).
• Keep a safe distance from all other water users. Be aware of all boating regulations.

Read all warning labels, 

Operator Guide, & Safety Handbook

before operation. Severe injury or death can result from ignoring

warnings or through improper use of this watercraft.

F08L04L

10

 

  

WARNING

Read

all warn

ing labels

, Operator

Guide & safe

ty

docu

ments b

efore op

erating. Se

vere injury

or death

can resu

lt from ign

oring such

informa

tion or im

proper use

of the watercraft.

• Directional control is lost when throttle is released or engine turn

ed off.

• Check throttle & steering before starting engine.

• Do not splash other or jump waves or wakes.

• Properly attach safety tether to your PFD.

• Keep a safe distance from other water users. Observe boating re

gulations.

• This watercraft is not design for night time operation.

KEEP WATE

RCRA

FT LE

VEL W

HILE

FUEL

ING

.

DO NO

T OVERFILL.

CHECK

OIL LEV

EL.

PERIOD

ICALLY

, CHEC

K FUE

L SYS

TEM

.

CLOSE

ENGIN

E COV

ER BE

FORE

FUEL

ING.

smo9701b.fm5  Page 22  Thursday, November 13, 1997  9:44 AM

www.SeaDooManuals.net

Summary of Contents for 1997 GS










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands