manualshive.com logo in svg

Sea-doo 1997 GS, Operator'S Manual

Share
Download
Sea-doo 1997 GS Operator'S Manual Download Page 48

46

FUEL AND LUBRICATION _______________________

Fueling Procedure

Do not allow anyone to remain on the
watercraft.

Do not smoke or allow open flames in
the vicinity.

Have a fire extinguisher close at hand.

Do not insert the spout too far in filler
neck.

Pour fuel slowly so that air can escape
from the reservoir and prevent fuel
flowback.

Do not lean watercraft while fueling.

Fill fuel tank to bottom of filler neck.
Do not overfill. Fully tighten fuel tank
cap and wipe off any fuel spillage.

Recommended Fuel

Use regular unleaded gasoline with 87
octane (Ron + Mon/2) specification.

NOTE:

 Look on service station

pump sticker for octane specifica-

tion. Do not mix oil with fuel except at
engine break-in. Refer to BREAK-IN
PERIOD. Always check injection oil
reservoir level when refueling.

The use of good quality fuel is neces-
sary. A well known fuel brand is highly
recommended.

Recommended Oil

All Models Except SPX/GSX/GTX/
XP

Use BOMBARDIER ROTAX INJEC-
TION OIL which is available from au-
thorized dealers. It is a blend of spe-
cially selected base oils and additives
which provides outstanding lubrica-
tion, engine cleanliness and minimum
spark plug fouling.

NOTE:

High quality low ash API

TC injection oil for 2-cycle engines

can be used if BOMBARDIER ROTAX
INJECTION OIL is not available

◆

WARNING

Follow these safe boating fueling
instructions explicitly.

◆

WARNING

Do not lean the watercraft to al-
low more fuel to fill the fuel tank.
The tank design makes provision
for fuel expansion of about 5%. If
this area is filled, fuel will expand
and may come out through fuel
vent hose. Keep watercraft hori-
zontal while fueling. Always stop
the engine before refueling. Fuel
is inflammable and explosive un-
der certain conditions. Always
work in a well ventilated area. Do
not smoke or allow open flames
or sparks in the vicinity. Never
top off the fuel tank and leave wa-
tercraft in the sun. As tempera-
ture increases, fuel expands and
might overflow. Always wipe off
any fuel spillage from the water-
craft.

-

CAUTION

Never experiment with other fu-
els or fuel ratios. Never use fuel
containing alcohol, methanol or
similar products including naph-
tha. The use of unrecommended
fuel can result in watercraft per-
formance deterioration and dam-
age to critical parts in the fuel
system and engine components.

'

'

smo9701a.bk : smo9701b.fm5  Page 46  Monday, November 3, 1997  9:54 AM

www.SeaDooManuals.net

Summary of Contents for 1997 GS










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands