Operation Manual
SYSTEM
OCR-504 Multispectral Radiometer
SECTION
A - OVERVIEW
The deep version of the OCR-504ICSW is shown in Figure 3 (dimensions are
in inches). The in-air and in-water weights are approximate. The housing is
constructed from PEEK plastic and has a depth rating of 2000 m. This
configuration is typically used with autonomous profiling floats.
This configuration uses a TELEDYNE-IMPULSE IE55-1206-BCR connector.
Figure 4 illustrates the connector pin configuration.
1
3
2
4
6
5
Figure 4 - TELEDYNE-IMPULSE IE55-1206-BCR
The pins are designated as follows:
Pin
Identification
Description
1
V-/SG
Power Supply Return / Signal Ground
2
Rx
RS-232 Telemetry Interface. Serial data from
computer to instrument.
3
NC
Not internally connected
4
V+
DC Power Supply (6 to 22 Volts)
5
Tx
RS-232 Telemetry Interface. Serial data from
instrument to computer.
6
NC
Not internally connected
Please note that the SatNet interface is not normally provided in this
configuration.
