Scout MT-700 ENT, Operation Manual

Page: 88 / 155

МТ-700 fleet tracking system 88
«Mechanism position» and «Mechanism movement» sensors are used to set the data
obtained from the (Mechanism position sensor), to gather data. The settings are analogue to the
«Seat belt» settings,.
For the J1708 protocol the following sensors are created: «Fuel sensor», «Fuel
consumption» and «Engine speed».
For «Fuel level» there is only one parameter –
write threshold -
threshold for the
changed value to create a new entry.
Default value – 10 uu.
Figure 95. Fuel level
For the «Fuel consumption» only one parameter –
write threshold (ml)
.
Default value – 200 ml.
Figure 96. Расход топлива
«Engine speed» is in the (
Figure 97
).