Scout MT-700 ENT, Operation Manual

Page: 43 / 155

МТ-700 fleet tracking system 43

Configuration through SMS-commands
The SMS-channel is used when local and remote configuration cannot be achieved, and
for remote control of the terminal’s outputs without computer access.
The phone that you use to send the commands should be submitted in the white list of
the terminal (Settings> Terminal White list).
All commands are made using only LATIN symbols; parameters should be separated
with a space and separated by a comma.

General setting order
Figure 40. General settings. Part 1
White number list
– List of the phone numbers from which the SMS-commands can be
received.
The phone numbers should be put into the Phone 1 –Phone 4 column
Setting the white list
can be achieved
Using the SMS-command
setwhitelist
An example of the command is following:
Setwhi79211112233
Terminal reply:
id(Setwhitelist): OK
.
GPRS
Settings– APN settings, used by the tracker to connect to the internet.
Those settings should be provided by the cellular provider. If the provider uses several
APNs, then you should choose the APN that provides internet access.