Scout MT-700 ENT, Operation Manual

Page: 40 / 155

МТ-700 fleet tracking system 40
Connecting to the “Universal Scout Configurator” using the “Universal 485 Configurator”
Figure 37. Universal Configurator
Connecting the terminal to the software “Universal SCOUT Configurator” should be
carried out in the following order:
1.
Prepare the tracker: insert a SIM card, then insert the backup battery plug, then
connect the antennas.
2.
Connect the 2-wire jack ( Figure 34 ) to one of the three available sockets.
3.
Connect the jack of the adapter (Figure 34) to the main terminal connector
(
Figure 36 ). The resulting connection is shown in ( Figure 37 ).
4.
Plug in the USB-cable ( Figure 35 ) into the Configurator.
5.
Plug in the USB cable into the computer’s USB-port.
6.
Launch the”SCOUT Configurator” software.
7.
At the logging screen ( Figure 38 ) choose the connection type (local, remote, 485
Configurator and the corresponding COM-port(COM41 at the figure).
8.
Press the “OK” button to open the window.