Scout MT-700 ENT, Operation Manual

Page: 69 / 155

МТ-700 fleet tracking system 69
Figure 66. «Voltage» sensor parameters
Using “Voltage” sensor (
Figure 66
) the following parameters can be changed:
Write threshold (mV) – threshold for the voltage change to create a new entry.
Filter length, s –
accumulation length (in seconds)to average the data.
Figure 67. «Fuel level» parameters
Using « Fuel level » (
Figure 67
) the following parameters are available:
Minimal value for the input (mV)
– the minimal value of the Output voltage of the sensor
Maximal value for the input (mV)
– the maximal value of the Output voltage of the sensor
If the Voltage will be below or above the listed borders, then the terminal will not
send data to the server.
New entry threshold
–a new entry will only be written if the differences between current
and previous values are greater than the threshold.
Recommended value – is the1% of the working range of the sensor. For the capacity
tumbled sensors – 0,5%.