Page 4 of 44
P/N 595189-01 Rev A 4/10
AdJuSTAble hArneSSeS
STANDARD HARNESSES
Two versions of the standard harness are available: a flame re-
sistant waist and shoulder harness made of Kevlar
1
black aramid
webbing with yellow stripes and metallic buckles, and a corrosion
resistant waist and shoulder harness made of black nylon webbing
with nonmetallic buckles. If accidental exposure to heat and/or flame is
possible, use only the Kevlar head harness and the Kevlar waist and
shoulder harness on SKA-PAK AT respirators. The black-colored nylon
webbing used on the corrosion resistant waist and shoulder harness
and the black-colored polyester head harness will soften or melt if
exposed to high temperatures and, if exposed to flame, may burn.
The SKA-PAK AT Retrofit Kit provides the SKA-PAK AT reducer as-
sembly and the required VIBRALERT® regulator to use the SKA-PAK
AT with an original SKA-PAK and SKA-PAK PLUS standard harnesses.
To maintain compliance with the NIOSH approval, a service update
of the associated cylinder and valve assemblies may have to be per-
formed by an authorized SCOTT Service Center. Check the NIOSH
approval label for the SKA-PAK AT, SCOTT P/N 595014-01, for the
list of approved component part numbers.
FULL BODY HARNESS
Where fall protection is required, the SKA-PAK AT is available with
a multipurpose Full Body Harness (P/N 805061-04). This harness is
intended to be used only in accordance with both the user's respira-
tory protection program and fall protection program. For additional
instructions on application, fitting, maintenance, and inspection of the
Full Body Harness, see DBI/SALA® document (SCOTT P/N 89497-01)
provided with the Full Body Harness.
generAl deScriPTion conTinued...
Airline
SuPPly hoSe
cylinder And
vAlve ASSembly
full body
hArneSS
Airline
connecTion
hoSe
PreSSure
reducer
heAd hArneSS
cylinder
vAlve Knob
breAThing
regulATor
WiTh vibrAlerT
hoSe from
PreSSure
reducer To
breAThing
regulATor
fAcePiece
PreSSure gAuge
WiTh elecTronic
AlArm
TYPICAL SKA-PAK AT
WITH FULL BODY HARNESS
REAR VIEW
TYPICAL SKA-PAK AT
WITH FULL BODY HARNESS
FRONT VIEW
WArning
do noT uSe The blAcK PolyeSTer heAd
hArneSS or blAcK nylon WAiST And
Shoulder hArneSS When AccidenTAl
exPoSure To high heAT or flAme iS
A PoSSibiliTy. in ThoSe circumSTAnc-
eS, The PolyeSTer mAy melT or burn
cAuSing inJury or mAy inTerfere WiTh
reSPirATory ProTecTion reSulTing in
SeriouS inJury or deATh.
WArning
mAnufAcTurerS inSTrucTionS for
The full body hArneSS muST be fol-
loWed. do noT uSe hArneSS if WeAr
or dAmAge iS PreSenT. if body hAr-
neSS hAS been SubJecTed To fAll
ArreST or imPAcT forceS iT muST be
immediATely removed from Service
And deSTroyed. connecTing SnAP And
d-ring muST be comPATible in SiZe,
ShAPe And STrengTh. fAilure To fol-
loW mAnufAcTurer’S inSTrucTionS
for hArneSS mAy reSulT in SeriouS
inJury or deATh.
