Page 18 of 44
P/N 595189-01 Rev A 4/10
regulAr oPerATionAl inSPecTion conTinued...
figure 9
FACEPIECE WITH
NO VOICEMITTERS
FACEPIECE WITH
VOICEMITTERS
voicemiTTerS
INSPECTION OF THE FACEPIECE
Examine the facepiece assembly for damaged or worn components. The
facepiece must be complete and in serviceable condition with no worn,
loose, or damaged components.
• The AV-2000 style facepieces include the AV-2000, the Weld-O-
Vista, and the Scott-O-Vista (the Scott-O-Vista does not have
voicemitters).
• The AV-3000 style facepieces include the AV-3000 and the AV-
3000 SureSeal.
Inspect the facepiece as follows:
1. Inspect the facepiece seal and other rubber components for de-
formation, wear, damage, or cracks.
2. Inspect the lens for cracks, gouges, scratches, or any condition
that could impair the operation of the facepiece or the user’s vi-
sion.
3. Inspect the lens frame or bezel for damage such as cracks or
distortion.
4. Check that all lens frame retainers or bezel screws are present
and installed correctly.
5. Check that all harness anchors are present and operating
properly.
6. Inspect the head harness for correct installation with all straps
oriented correctly.
7. Inspect the head harness for damage or worn components.
8. Inspect the voicemitters for dents or damage. Verify that the voicemit-
ters are properly installed and secure in the voicemitter ducts.
