Scott 10,000, Instruction Manual

Page: 63 / 323

3 Operation
3--23
C9999--2 Issue 1
MAIN
POWER
SWITCH
Fig. 3-46. Circuit Breaker Switch (ON)
3.3.4 Machine Start--Up
Step: 1. Main Power Switch ON .
HEATER
Fig. 3-47. Warm Up Heater
To laminate plastic to paper:
Step: 2.
Press HEATER pushbutton.
Step: 3. Set temperature controllers to
220--230
_
F as a starting point.
Note !
Starting Heaters now will allow
heaters to reach operating
temperature while the rest of the
machine is being set up.
ADJUSTMENT KNOB
Fig. 3-48. Loosen Folding Roller Guide
Adjustment Knob
Reel Holder
Step: 1.
Loosen adjustment knob on the bottom
folding roller guide.