Scott 10,000, Instruction Manual

Page: 48 / 323

3 Operation
3--8
C9999--2 Issue 1
DRIVE SPEED
Fig. 3-14. Main Drive Feed
3.2.3.12 SPEED -- Adjustment Control
Adjusts main drive motor speed. The dial is turned
clockwise to increase, and counterclockwise to
decrease the machine drive speed.
COUNT SET
NUMBER
OF
SHEETS
RAN
COUNT SET
COUNT RESET
Fig. 3-15. Counter
3.2.3.13 COUNTER
Activating the Counter, allows operator to specify
an exact number of sheets to be run. The feeder
shuts off after the requirement has been met.
Note !
Additional sheets may be fed
depending on machine speed.
The counter only counts when the machine is in
RUN mode and the Counter button is ON. The
digital counter counts forwards to the number
specified, then shuts feeder and vacuum OFF
when that number is reached.
●
Do not change setting while counter is running.
Fig. 3-16. Production Sheet Counter
3.2.3.14 PRODUCTION SHEET COUNTER
This counter will record total number of sheets.
The counter is located in the control cabinet
(CTR2).
Note !
Counter can not be reset.