Scott 10,000, Instruction Manual, Page: 46 / 323

3 Operation
3--6
C9999--2 Issue 1
OUT OF
PLASTIC
Fig. 3-6. Out of Plastic Lamp
3.2.3.4 OUT OF PLASTIC -- LAMP
Lamp will illuminate when upon pushing the Plastic
Feed button, the proximity switch on the plastic
feed does not sense plastic at the feeder
discharge. The plastic chip removal vacuum and
the paper feed vacuum pump will also be disabled
until the plastic spool is refilled.
PLASTIC
FEED
Fig. 3-7. Plastic Feed Pushbutton
3.2.3.5 PLASTIC FEED -- White Illuminated
Pushbutton
Turns on the chip removal vacuum and allows
plastic to enter the Tip Die, if the reel is threaded
onto the machine. The plastic chip removal
vacuum operates only when Plastic Feed is on and
the machine is in Run with machine running.
COUNT
REACHED
Fig. 3-8. Count Reached Lamp
3.2.3.6 COUNTER REACHED --
Amber Indicator Lamp
This lamp will illuminate when the machine has
produced the amount predetermined by the
counter. Once the count has been reached, the
paper feed vacuum pump will shut off so that paper
feed will stop. Also, if plastic is being applied to the
paper stock, the plastic chip removal vacuum will
shut off. Both units will resume operation once the
counter has been reset.
COUNTER
Fig. 3-9. Counter On/Off -- Illuminated
Pushbutton
3.2.3.7 COUNTER ON / OFF --
White Illuminated Pushbutton
When the counter button is pushed, the button
illuminates indicating that the counter is on.
This will allow the operator to turn off the counter to
run make product without losing the current count.