Scott 10,000, Instruction Manual

Page: 156 / 323

4 Maintenance
4--49
C9999--2 Issue 1
If you cannot get the proper setting by performing the above procedure, send the knives to Scott for
sharpening. DO NOT JAM THE KNIVES INTO EACH OTHER TO MAKE THEM CUT.
The above procedure is important for the following reasons:
1. If the above is not done, they will require much more sharpening than they should.
2. You will require new knives much more frequently thus incurring unnecessary cost.
3. If the machine is run with dull knives or the lower knives are jammed against the upper knives, you can
ruin the tabcutting packages on the machine. To replace the tabcutting packages, you will incur
unnecessary expense and face the risk that your machine will be down for an extended period of time
based on the availability of replacement parts.