Scott 10,000, Instruction Manual

Page: 124 / 323

4 Maintenance
4--17
C9999--2 Issue 1
Fig. 4-18. Location of Tab Cutter Eccentric
4.2.6 Tab Cutter Timing
Tab cutter eccentric is located on the backside of
the machine.
TIMING MARKS
TAB CUTTER
DRIVE ECCENTRIC
Fig. 4-19. Position of Tab Cutter Drive Eccentric
Step: 1. Locate long rod at the opposite end of
the rear plate that connects to the tab
cutter drive eccentric.
Step: 2. Timing marks are located on tab cutter
drive eccentric and machine frame.
Step: 3. Rotate output sprocket of motor gearbox
assembly located inside rear motor
access cover. This will rotate the main
drive shaft to allow for alignment of the
timing marks.