User Manual
Chapter 2. Installation
Page 2-12
P/N 2349-72784-00
Table 2-8:
QPSK Receiver Configuration Procedure
SEQ.
#
MENU DISPLAY MESSAGE
PROCEDURE
a.
RECEIVER CONFIGURATION
Function Start.
The
CONFIG
sub menu is displayed.
Select the
RECEIVER
option and proceed to configure as
described below.
b.
Frequency Range
Parameter
1.
Select
Frequency Range
option.
2.
Set the frequency according to the BAND input.
c.
LNB Power Supply
Parameter
3.
Select
LNB Power Supply
option.
4.
Set the LNB Power Supply to: 14, 18 or OFF as
required
d.
LNB 22 kHz
Parameter
5.
Select
LNB 22 kHz
option.
6.
Using the controls, set the option to ON or OFF as
required
e.
Symbol Rate
Parameter
7.
Select
Symbol Rate
option.
8.
Set the Symbol Rate as required.
f.
Viterbi Rate
Parameter
9.
Select
Viterbi Rate
option.
10. Set to: 1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, or
AUTOMATIC as required.
g.
Spectral Inversion
Parameter
11. Select
Spectral Inversion
option.
12. Set the option to AUTOMATIC, NORMAL, or
INVERTED as required.
Table 2-9:
QAM Receiver Configuration Procedure
SEQ.
#
MENU DISPLAY MESSAGE
PROCEDURE
a.
RECEIVER CONFIGURATION
Function Start.
The
CONFIG
sub menu is displayed.
Select the
RECEIVER
option and proceed to configure as
described below.
b.
VHF/UHF Frequency
Configuration Option
1.
Select
VHF/UHF Frequency
option.
2.
Set the required input frequency.
c.
Symbol Rate
Parameter
3.
Select
Symbol Rate
option.
4.
Set the symbol rate as required.
d.
Viterbi Rate
Parameter
5.
Select
Viterbi Rate
.option.
e.
Modulation Mode
Parameter
6.
Set the QAM mode to:
16 QAM, 32 QAM, 64 QAM, 128 QAM, or 256 QAM,
as required.
f.
Spectral Inversion
Parameter
7.
Select
Spectral Inversion
option.
8.
Set the option to AUTOMATIC, NORMAL, or
INVERTED as required.