manualshive.com logo in svg

Scopus CODICO IRD-2600, User Manual, Page: 13 / 134

Share
Download
Scopus CODICO IRD-2600 User Manual Download Page 13

IRD-2600 / IRD-2800 
Integrated Receiver Decoders 

 

 

P/N 2349-72784-00 

 

Page 1-1  

 

1. 

OVERVIEW 

1.1. 

General Information 

The CODICO

®

 IRD-2600 and IRD-2800 are a new generation of the 4:2:0 / 4:2:2 CODICO

®

 

family of Integrated Receiver Decoders. Both IRD-2600 and IRD-2800 are suitable for SCPC 
and MCPC 4:2:0 applications; IRD-2800 provides support for 4:2:2 applications as well. With 
DVB-CI (Common Interface) decryption capabilities, the IRD 2600 and IRD-2800 output high 
quality video, audio and data for satellite, cable and telecom programs distribution. IRD-2600 
supports two stereo outputs while IRD-2800 supports up to three stereo outputs. 

Both IRD-2600 and IRD-2800 contain a demultiplexer, MPEG-2 video and audio decoders, 
as well as Data and VBI insertion functions. 

Control and management can be obtained via the IRD front control panel, an optional Infrared 
Remote Control, or an attached PC terminal. The IRD also supports remote management, 
control and software download, via transport stream link from the CODICO

®

 NMS-4000 

Network Management System. 

Input and Output sections support variable modules for versatility of the IRD-2600 and 
IRD-2800. Input of DVB-ASI transport Stream or RS-422 directly to the decoder, as well as 
ASI output (optionally decrypted) and loopthrough is also supported. ASI TS and RS-422 can 
be connected at the same time with the various front ends. The desired input is selected by 
the user. 

 

Figure  1-1: 

IRD-2600 and IRD-2800 - General View 

 

1.1.1. 

Highlights and Benefits 

The IRD-2600 and IRD-2800 Integrated Receiver Decoders provide the following benefits: 

• 

DVB Common Interface (2 Slots), Supports de-scrambling of all leading CAMs 

• 

On-board DVB descrambling with BISS Mode-1 and BISS-E (DSNG-CA) support. 

• 

Extended Front/End Interface options 

• 

High and Low Speed Data Outputs 

• 

Advanced software control and monitoring of all IRD functions and capabilities. 

The following sub-paragraphs detail the features, enhancements and options of the IRD-2600 
and IRD-2800. 

Summary of Contents for CODICO IRD-2600







































































































































Reviews:

No comments