Operational Precautions and
Limitations
1
Note:
Before operating the system, carefully read all of the sections of this guide.
This section contains general safety-related information and provides regulatory compliance
information. It also describes potential hazards and associated warnings for the system and the
precautions that should be taken to minimize the hazards.
In addition to this section, for information about the symbols and conventions used in the
laboratory environment, on the system, and in this documentation, refer to the section:
. For site requirements, including mains supply, source exhaust, ventilation,
compressed air, nitrogen, and roughing pump requirements, refer to the document:
Site Planning
Guide
.
General Safety Information
To prevent personal injury or system damage, read, understand, and obey all of the safety
precautions and warnings in this document, the manufacturer chemical safety data sheets
(SDSs), and product label information. Labels are shown with internationally recognized
symbols. Failure to heed these warnings could result in serious injury.
This safety information is intended to supplement federal, state, provincial, and local
environmental health and safety (EHS) regulations. The information provided covers system-
related safety information applicable to the operation of the system. It does not cover every
safety procedure that should be practiced. Ultimately, the user and the organization are
responsible for compliance with federal, state, provincial, and local EHS regulations and for
maintaining a safe laboratory environment.
Refer to the appropriate laboratory reference material and standard operating procedures.
Documentation Symbols and Conventions
The following symbols and conventions are used throughout the guide.
DANGER! Danger signifies an action that leads to severe injury or death.
Operational Precautions and Limitations
System User Guide
RUO-IDV-05-6475-C
SCIEX 3200 Systems
7/114
