13 | 8 4
8.
Function Area (FUNCTION)
TEST key: press the key and the corresponding key lights up, the instrument is ready to test;
SETUP key: press the key and the corresponding key lights up, the instrument enters parameter
setting interface;
SYSTEM key: press the key and the corresponding key lights up, the system setting interface will
be displayed;
9.
Arrow Key
Move the cursor on the screen, the selected parameter is displayed in blue.
10.
Numeric keypad
Enter numbers or enter characters (file names) when needed.
11.
Indicator Area
PASS: when the test data does not exceed the set data after the test, the tester will light in PASS;
FAIL: when the test data exceeds the set data in test, the tester will light in FAIL;
DANGER: as soon as the test starts, this key will light up, indicating that the test is in progress,
there is a high voltage being output.
12.
HV1 Terminal
T
he high potential terminal of high voltage output, this is the high voltage output terminal, when
DANGER light is on, it means there is high voltage delivering, touching is forbidden.
13.
HV2 Terminal
RTN terminal of high voltage output (only for SME1190, when GFI is set to FLOAT), when
DANGER light is on, it means there is high voltage delivering, touching is forbidden.
14.
RTN/LOW Terminal
High voltage test reference terminal, which is low potential terminal.
15.
LCD Screen
Display test information.
3.2 Rear Panel
Figure 3-2 gives a brief description of the rear panel.
Figure 3-2
1.
HV2 Terminal
RTN terminal of high voltage output (only for SME1190, when GFI is set to FLOAT), when
