For more information about on-screen messages, see “Appendix B Troubleshoot-
ing”.
«$ERXWWKHFXUUHQWFKDQQHO
When you navigate to menus from video, the information displayed is associated
with the current (video) channel, which is also displayed on-screen at the Available
Services menu. If no changes have been made to the current setup, you are auto-
matically returned to the same channel when you exit to video. If any changes
have been made at the Receiver Setup menu only, exiting to video from menus
after saving changes is always preceded by the Installer Channel banner display
(i.e., channel 0). Note that changes made at any other menu permit direct return to
the previously-watched channel. For more information about the installer channel,
see “Setting up the receive”.
To change the current channel
Step 1. Move to Channel and press SELECT to clear the display field.
Step 2. Enter a valid channel number using the numbered front panel buttons and then
press SELECT.
Repeat the above actions to change the current channel. When you exit to video,
the virtual channel you set is displayed.
