To display or change the Search setting
Step 1. Press ALT twice to change from normal operation to Alt-2 Mode.
The ALT LED is ON.
Step 2. Press 0 to display the current Search setting. Pressing 0 repeatedly displays
available settings (SOn or SOFF). The default setting is SOFF (OFF).
Step 3. When the desired setting is displayed at the front panel, press SELECT to
save the setting.
The front panel displays sav?.
Available options:
Press 1 to save the new setting (donE), or press 2 to discard all
changes (rstr), or press 3 to cancel the operation (abrt).
Repeat this action to change (i.e., enable or disable) the Search setting. A Signal
Search can be executed from any channel. For more information about signal
searches, see “Setting up the receiver”.
6LJQDO6WUHQJWK
Display only:
The Signal Strength option is an Alt-1 Mode function. The displayed
Signal Strength (any number from 0 through 99) is associated with the Symbol Rate
and signal input level.
To display the Signal Strength
Step 1. Press ALT once to change from normal operation to Alt-1 Mode.
The ALT LED flashes ON and OFF.
Step 2. Press 6 (SIG) to display the Signal Strength.
The Signal Strength can be displayed from any channel.
6\PERO5DWH
The Symbol Rate option is an Alt-1 Mode function. The selected Symbol Rate must
match the Symbol Rate associated with the transmitted signal. If you are unsure
about which Symbol Rate to use, contact your dealer/reseller, or local service pro-
vider.
To display or change the Symbol Rate
Perform the first step if you are changing the Symbol Rate.
Step 1. If required, press 0 and then press SELECT to display the Installer Channel.
Step 2. Press ALT once to change from normal operation to Alt-1 Mode.
The ALT LED flashes ON and OFF.
Step 3. Press 5 (SYM) to display the current Symbol Rate. Pressing the Ï/Ð arrow
buttons displays higher or lower settings (Symbol Rates are displayed from 3
MS/s through 30.8000 MS/s in 10 KS/s steps). The default setting is
28.3465 MS/s.
Step 4. When the desired setting is displayed at the front panel, press SELECT to
save the setting.
The front panel displays sav?.
Available options:
Press 1 to save the new setting (donE), or press 2 to discard all
changes (rstr), or press 3 to cancel the operation (abrt).
Repeat this action to change to another Symbol Rate (see “…About changing the
Symbol Rate”). You can use the
Í
/
Î
arrow buttons to change between low and
high resolution (see
“
…About frequency settings”). The Symbol Rate can be dis-
played from any channel, but can only be changed from the Installer Channel (see
“…About the current channel”).
