Cisco Wideband Applications
For more information, please refer to the Continuum DVP (X)DQA(24), DQA
Mapping Assistant Tool for User-Defined UDP Port Mapping Application Note.
Enable PRBS stuffing. The procedure to enable and disable PRBS stuffing can be
found in topic Configuring the Quad Channel QAM Card on page 31.
For ITU-B QAM encoding set the Interleaving parameter to I=32, J=4. The
procedure to change the Interleaving parameter can be found in topic
Configuring the Quad Channel QAM Card on page 31.
Disable the PAT and PMT playout by setting the PAT playout rate and PMT
playout rate to 0 seconds. The procedure to change the playout rate of the PAT
and PMT can be found in topic General Configuration Settings on page 20.
4018055 Rev B
81
Summary of Contents for Continuum DVP eXtra Dense QAM Array 24
