Scientific Atlanta Continuum DVP eXtra Dense QAM Array 24, Configuration Manual

Page: 37 / 104

Changing the Device Settings
Setting the Device Clock
About the Device Clock
The internal clock of the XDQA24 system can be set manually or can be synchronized
with an external device (e.g. Time-server…). The clock settings are grouped under the
Clock page.
Changing the Current Time
The following procedure explains how to change the current time of the XDQA24
system.
1
On the web browser user interface of the XDQA24 system, click the Clock link.
Result: The Clock page is displayed.
2 Enter the time and date in the Current Time box.
3 Press the Apply command button to confirm or the Reload command button to
abort the operation.
Syncronizing the XDQA24 System with a Time-Sever
The following procedure explains how to synchronize the XDQA24 system with a
time-server.
1
On the web browser user interface of the XDQA24 system, click the Clock link.
Result: The Clock page is displayed.
2 Set the Time Synchronization with Server box to enable.
3 Enter the following parameters:
-
Synchronization Interval: this parameter specifies the synchronization
interval in minutes.
-
Synchronization Offset: this parameter specifies the time difference in
minutes when the time-server is in another time zone.
-
Synchronization Server IP Address: this parameter specifies the IP-address
of the time-server that should be used for time synchronization.
-
Synchronization Start Time: this parameter specifies the offset of the
synchronization process compared to midnight in hours and minutes.
4018055 Rev B 23