Scientific Atlanta Continuum DVP eXtra Dense QAM Array 24, Configuration Manual

Page: 39 / 104

Configuring the GbE Input
4018055 Rev B
Configuring the GbE Input
Changing the Input Selection
Changing the Main Input
The XDQA24 allows you to select which Gigabit Ethernet port you wish to use as
main input.
The following steps explain how to change the Main Input configuration.
1
On the web browser user interface of the XDQA24 system, click the Input link.
Result: The Input configuration page is displayed.
2 In the Main Input drop down box, select input 1 or input 2.
3 Click the Apply command button to confirm or the Reload command button to
abort the operation.
Enabling Loop Through
This setting configures the system to act as a bridge between the two inputs.
Therefore all data incoming on input 1 gets routed to input 2 and vice versa.
Perform the following steps to configure the loop through function.
1
On the web browser user interface of the XDQA24 system, click the Input link.
Result: The Input configuration page is displayed.
2 In the Enable Loop Through drop down box, select one of the following settings:
-
Disabled: no data is passed from Main input to Backup input.
-
Promiscuous: all data arriving at the Main input is passed to the Backup input.
25