Scientific Atlanta Continuum DVP eXtra Dense QAM Array 24, Configuration Manual

Page: 43 / 104

Configuring the GbE Input
Changing the Network Settings
Introduction
The XDQA24 system is provided with a 10/100Base-T Ethernet port and two Gigabit
Ethernet Ports. Both the IP Address and the Net Mask of these ports and the Gateway
of the XDQA24 system can be changed.
Changing the Network Settings
The following explains how to change the network settings of the system.
1
On the web browser user interface of the XDQA24, click the Network link.
Result: The Network page is displayed.
2 Change the IP Address and/or Net Mask of the Ethernet port in question or the
Gateway of the system.
3 Press the Apply command button to confirm or the Reload command button to
abort the operation.
Notes:
After changing the IP Address the device has to be rebooted.
Changing the IP Address of the 10/100Base-T Ethernet port involves
disconnecting the web browser user interface. You have to use the new IP address
to reopen the GUI.
The Ethernet ports should be connected to a different subnet.
4018055 Rev B 29