Maintenance and repair work
05.00 | LDT | Montage- und Betriebsanleitung | en | GAS360927
135
Replacing the brake piston
1
Brake cover
2
Retaining ring
3
O-ring
4
Disk spring
5
Brake piston
Uninstalling the
brake piston
Ø
Using a vise, clamp the brake cover (1).
Ø
Remove the retaining ring (2).
Ø
Slowly loosen the vise.
Ø
Remove the brake cover (1), O-ring (3) and disk springs (4).
Ø
Using pliers (with braces), pull out the brake piston (5).
Installing the brake
piston
Ø
Slightly grease and insert the O-ring (3).
Ø
Insert the brake piston (5) and fit the membrane into place.
Ø
Fit the disk springs (4) and the brake cover (1).
Ø
Set the vise onto the brake cover (1) and press in the cover.
Ø
Fit the retaining ring (2).
Ø
Loosen and remove the vise.
NOTICE
When installing the disk springs (4), make sure the individual disk
springs are placed in the correct position.
•
Short slides are equipped with 5 disk springs
•
Long slides with double brakes are each equipped with 4 disk
springs
