Schulte Titan 5000 II Series, Operator'S Manual, Page: 104 / 108

MAINTENANCE
Titan 5000 Series II 01/22 Maintenance Section 5-8
© 2022 Alamo Group Inc.
MAINTENANCE
LUBRICATION
Grease Schedule
Grease should meet the following recommendations:
• SAE Multi-purpose grease
• SAE Multi-purpose grease containing 3 to 5 per cent molybdenum disulfide
• Use SAE (NLGI) #2
Grease points around the Rock Picker will be identified by one of the following greasing decals. In some cases,
multiple grease points may be identified by a single decal if they are close together and the require the same
greasing schedule.
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
(SG-15)