A-2. Electrical Summary Table
Input electrical ratings
115 VAC systems: 115 VAC, 300 mA, 50/60 Hz
230 VAC systems: 230 VAC, 150 mA, 50/60 Hz
Fuses
250 V, 2A
250 V, 2A
(No User Replaceable Fuses)
Unless otherwise specified, only the manufacturer
should service this unit. It contains no user-
serviceable parts.
Restricted service statement
A-3. Image Characteristics
Images acquired by the iPan System meet the following criteria.
Color depth
12 bits per pixel (4096 gray levels)
Effective pixel size
96 microns
Static resolution
4 line pairs per millimeter (approximately)
Signal to noise ratio
80:1
A-4. Timing Characteristics
The CCDs in the iPan Sensor employ TDI (Time Delay Integration) to generate a single
image of the subject as it travels past the Sensor. For the resulting exposure to be clear
(not “smeared” or “blurred”), the image readout at the CCD level and the panoramic
machine’s motion must be exactly synchronized by iPan. Other timing intervals
supported by the software are listed below.
Timeout after loss of synchronization
7 seconds (or user-defined interval specified by the
Early Stop Timeout setting in Panoramic Acquisition
Control Properties)
15 seconds (or user-defined interval specified by the
Initial Timeout setting in Panoramic Acquisition
Control Properties)
Timeout when starting acquisition
Time to display image after acquisition
30 seconds
Time to display archived image
10 seconds
iPan User Guide
B1051601 Rev. –
21